Y9550C錐齒輪滾動檢查機

1．機床的用途和應用范圍

本機床的工作，是利用一對齒輪或一個齒輪與一個標準齒輪互相滾動的方法來檢查兩軸心線相交成角的直齒、弧齒和準雙曲面的錐齒輪副的接觸區。

它可完成下列檢驗任務：

（1） 齒輪副的最后檢驗：確定齒面的接觸區，最好的安裝距。

（2） 確定切齒機床為了修正接觸區所需的調整數據。

（3） 連續生產的檢驗：可確定切齒的一致性。

（4） 對熱處理前后的檢查數據進行比較，可獲得為補償熱處理變形，切齒機床新的調整數據。

2. 主要規格

Y9550C HYPOID TESTER

I. Machine Applications

With the rolling method of a pair of gears or a gear and a master gear, this machine tests the tooth bearings of straight bevel, spiral bevel and hypoid gears of intersecting shafts

The following tests may be performed on this machine:

1) the final tests of a gear pair to determine the tooth bearing and the best mounting distance;

2) to determine the necessary setting data for the gear cutting machines;

3) continuous tests during the production to guarantee the uniformity of the gears produced, and

4) to gain the new setting data for the gear cutting machines through comparisons of the testing results before and after the heat treatment.

II. Machine Specifications